Checking In On The Swinging Cowboy

Swinging Cowboy, Day 7

As I wrote last time, my Swinging Cowboy IPA was less than stellar on first taste. I also noted at the time that it wasn’t a fair comparison given the immaturity of the beer so close to its dry-hopping and carbonation. We’re now seven days removed from that last update, so how’s the Cowboy now?

In short: much better.

Aroma

I had complained about the grassy aroma wafting off this beer, three days from its last dry-hop charge. Today that grassy-ness has faded almost completely and has been replaced by a wallop of strong citrus character.

Appearance

As you can see from the photo above, I have very greasy fingerprints and a Megaman doll. You can a pretty fair representation of the beer’s color and clarity (or lack thereof). Without the bright light behind it, the beer is a shade or two more orange. Overall, this is what I was shooting for given the light grain bill and the NE IPA style I’d attached to it.

Flavor

This was the biggest area of improvement, and thank Crom for that. The vegetal, grassy flavor is almost completely gone, rounding into a nice smooth bitterness. It’s still there, but much less pronounced and I think by the time JAMBO rolls around next weekend it should be a distant memory. In its place, the bitterness I mentioned is still prevalent, but there’s a much stronger fruitiness. Mango, papaya, tangerine, all those expensive orange-colored fruits that Yuppie moms buy at Whole Foods. This isn’t near as fruity as your average Trillium brew, but it has a much stronger bitterness. Similar (but not comparable) to Heady Topper.

Mouthfeel

Still rich and full-for-an-IPA. Not quite as “juicy” as a Treehouse or Trillium; again I’d put it closer to the OG of NE IPA’s (Heady) in mouthfeel. Creamy, but not chewy. Right where I like it (that’s what she said).

Overall

Talk about a night-and-day difference. I may have accidentally (but happily) sped up the aging process due to a gas leak in the keg. The gas connecting post wouldn’t seal, so whenever I removed the gas line – say, to gas another keg – all of the CO2 escaped. This happened multiple times, most likely introducing oxygen. While normally this would be bad, it is my theory that this help scrub out the grassy and vegetal notes much faster. I can’t really run a test on it (I’m not the Brulosophy eggheads), because I’ve now fixed that leak and don’t know how much scrubbing is actually left.

Overall, I’m now MUCH happier with this beer and excited to serve it at JAMBO. There’s also an upcoming homebrew competition for IPAs that I might consider entering if there’s any leftovers.

Cheers!


Check out our affiliates:

hbs_logo_wide

Logo2

 

Side-by-Side IPA Comparison

Looking into this my chest freezer this fine Wednesday evening (what is it with me and Wednesdays?), I realized that I had two different kegs of IPA. The older of the two is Hustle and Swagger, an IPA brewed with the myriad of free hops I received at Homebrew Con 2016. The younger is a just-kegged, double-dry-hopped take on my old Eighty-Sixed recipe called Swinging Cowboy*. So I figured I try them out side-by-side and see what I like and dislike about each IPA. First, the recipes.

Swagger (left) and Cowboy (right)

Hustle & Swagger

Fermentables

Amount Fermentable
11.0 lb

Pilsner (US)

2.5 lb

Maris Otter Pale (UK)

2.0 lb

Munich – Light 10L (US)

0.5 lb

Munich – Dark 20L (US)

0.5 lb

Turbinado

Hops

Amount Hop Time Use Form AA
2.0 oz Nugget (US) 60 min First Wort Pellet 14.3%
1.5 oz Chinook (US) 15 min Boil Pellet 12.0%
1.5 oz Centennial (US) 15 min Boil Pellet 10.5%
2.0 oz Cascade (US) 0 min Boil Pellet 7.0%
1.0 oz Equinox 0 min Boil Pellet 15.0%
2.0 oz Zythos (US) 5 days Dry Hop Pellet 11.0%
1.0 oz Equinox 5 days Dry Hop Pellet 15.0%
1.0 oz Pekko 5 days Dry Hop Pellet 13.0%

Yeasts

Name Lab/Product Attenuation
Hansen Ale Blend White Labs 78.0%

Swinging Cowboy

Fermentables

Amount Fermentable
6.75 lb

Golden Promise (UK)

6.75 lb

Pilsner (US)

1.25 lb

Flaked Oats

0.75 lb

Turbinado

0.63 lb

Carapils (Dextrine Malt) (US)

Hops

Amount Hop Time Use Form AA
1.25 oz Nugget (US) 60 min Boil Pellet 14.3%
1.5 oz Cascade (US) 30 min Boil Pellet 7.0%
1.1 oz Centennial (US) 15 min Boil Pellet 10.5%
2.0 oz Citra (US) 0 min Boil Pellet 13.7%
3.0 oz Citra (US) 4 days Dry Hop Pellet 13.7%

Yeasts

Name Lab/Product Attenuation
Vermont Ale The Yeast Bay 78.5%

Another look.


Comparison

Miscellaneous

  • Hustle & Swagger is noticeably dark in color, though the calculated difference is only supposed to about about 1 SRM.
  • Both beers were dry-hopped, but Swinging Cowboy was double-dry hopped in the fermenter, while Hustle & Swagger was dry-hopped in the keg.
  • Neither beer is particularly clear and both contain some hop particles.

Aroma

  • Despite being brewed on 6/30, Hustle & Swagger still packs a noticeable hop aroma. That aroma is predominantly “green” and “dank.” This is probably from the multitude of different hops that went into this thing. There is a citrusy, sweet, fruit aroma on the back end. Almost like tropical fruit candy, but less artificial if that makes sense.
  • Only three days removed from its second dry-hop charge, Swinging Cowboy has a grassy nose. There’s underlying citrus in there behind it, but this smell a lot like lawn clippings (and not because I mowed the lawn today).
  • Winner: Hustle & Swagger, by a nose.

Appearance

  • As noted above, both beers are turpid with some small hop particles swirling. In Hustle & Swagger this is likely due to the hops still being in the keg. With Swinging Cowboy, the beer just finished carbing and hasn’t settled yet. This is the very first pour of the beer.
  • They are fairly similar, with SC being a shade lighter.
  • Winner: Draw

Flavor

  • Hustle and Swagger has mellowed nicely. This was originally one of the most bitter beers I’d brewed, but some of that has evened out. There’s still a nice bitterness but there’s more hop flavor coming across: some citrus, mango, and a hint of sweetness before a bitter finish. Not world-class, but pretty good.
  • Woah. Um… what’s going on with Swinging Cowboy? The flavor is a… not good. Vegetal, grassy. There’s hints of citrus buried underneath but this will need some time to clear up, much like the aroma.
  • Winner: Hustle & Swagger

Mouthfeel

  • Hustle & Swagger is a bit thin for what I was going for; I prefer the juicier, fuller New England-style bodies on my IPAs (actually on most styles). This is within range for an IPA, and not watery but not dry enough on the back-end for that West Coast bite.
  • In contrast, Swinging Cowboy is right where it should be. It feels substantial without being thick, viscous, or chewy. This is right in line with where I like my IPAs.
  • Winner: Swinging Cowboy

Overall

  • By the numbers, Hustle & Swagger is the clear winner, which is a bit of a disappointment.
  • Of course, this comparison isn’t exactly “fair” or “scientific.” Swagger is over a month old and Cowboy is fresh off the dry-hops.
  • That said, Swagger is the better beer right now, but I’m not sure Cowboy won’t surpass it in about a week or so.

Final Thoughts

Truth be told, I’m not sold on either of these beers. Hustle & Swagger is okay, but not up to snuff. I think the “kitchen sink” approach I took with this beer left it flawed and muddled. Still drinkable, but not worth attempting again. Swinging Cowboy on the other hand… I don’t know what to think of this beer right now. When I tasted the hydrometer sample it was a little off, and fully-carbed I’m not so sure what happened here.

Given the busy-ness of this summer, the rushed nature of both these brew days and the state of my brewing equipment (read: not properly cleaned), I wouldn’t be surprised if there weren’t significant flaws hiding behind all the hops in these beers. It’s hard for me to say. Much like my momma is blind to my many flaws, I have trouble nit-picking my own creations. I still have some hope that Cowboy will get better with a bit of age, but I think Swagger is as good as it’s going to get right now, which is a bit disappointing.

Lesson learned: I need to better prepare for my brew days and need to re-dedicate myself to mess of chemicals, tubing, fixtures, and kegs in my bathroom that need a thorough cleaning.

Cheers!

* The story behind “Swinging Cowboy” is a long one that I may regale you with after this year’s Homebrew Jamboree (aka JAMBO). 


Check out our affiliates:

hbs_logo_wide

Logo2

Getting Back After It

It’s been a busy month around here, but unfortunately not much of it has been spent brewing. Earlier this month, I traveled to Baltimore for Homebrew Con. Shortly after that I celebrated Harpoon’s 30th anniversary with some beer writers and tenured Harpoon employees (I’ll have an upcoming article on this for the Dig). And this past weekend was Sierra Nevada’s Beer Camp at Boston’s City Hall Plaza. So as I start to sober up and finish up the kegs from Beans N Brew, I realize it’s time to start brewing again.

I think it’s time to officially dub 2016 the Summer of IPA, because outside of a rebrew of Nelson’s Saison aka Classy AF, I’m focused on brewing a couple more IPAs in the near future. So IPA #3 and #4, what will they be?

IPA #3 will be a New England-style IPA, based on this recipe from Ed Coffey, brewed for a Brulosophy exBEERiment. The grain bill is fairly straight-forward: ~80% pale malt and 20% flaked oats, but with a fairly complicated hopping/dry-hopping regiment. I’m interested in trying the double dry-hopping technique again (I haven’t tried this in a while); I’ll probably alter the hops used but I’ll follow this recipe pretty closely (before I inevitably decide to fuck with it).

SWAG

SWAG

IPA #4 already has a name: Hustle and Swagger. This will be yet another variant on my Hustler recipe, using a lot of the free “swag” hops that I got from Homebrew Con. There’s some interesting hops in this recipe thanks to the good folks at YCH Hops and Yakima Valley:

  • Zythos – tropical (pineapple) and citrus tones with slight pine characteristics
  • Equinox – unique berry-and-fresh-pepper character
  • Pekko – clean, pleasant, floral, citrus, mint, herbal, mellow, pineapple, thyme, saaz-like cucumber, sage, touch of lemon

I’ll probably have to build up a starter for the Hansen Ale Blend from White Labs that I used for IPA #2. It’s been a while since I harvested the yeast from the starter, so I’m hoping it’s still viable. If not, I’ll augment it with some of the free yeast I received at Homebrew Con, probably Mangrove M44 West Coast yeast. If I’m using swag hops, might as well use swag yeast too, right?

I’ll post recipes along with the brew day recaps soon. I’m hoping to brew IPA#3 on Friday.

Sláinte!


Check out our affiliates:

hbs_logo_wide

Logo2

IMG_1073

Dialing in an IPA

With Mother’s Day and some shitty weather on Sunday, I had to push a scheduled brew day to Monday afternoon. It seems that whenever I’m not brewing a beer for a club barrel project or for some competition, I’m constantly brewing IPAs. This isn’t exactly the case but it certainly feels that way. Since I started brewing (and subsequently started blogging about my brewing), I’ve been on a quest for a “house” IPA recipe. If you visit my Brewtoad page, you’ll see dozens of IPA recipe variations that I’ve constantly tried to tweak.

And you know what, I’m getting pretty damn close.

As I’m writing this, I’m drinking a just-finished-carbonating IPA #1 aka Eighty-SixedI’ve started numbering my IPAs this year so that I can pick out what I like/dislike from each one of them and incorporate that into subsequent recipes. I also thought this would be a good opportunity to go over my brewing process and talk about how I got to IPA #2 aka Hustle Harder.

IMG_1076

IPA #1 aka Eighty-Sixed. Citrus and delicious.

The Grain Bill

11.0 lb
Pilsner (DE)
2.5 lb Maris Otter Pale (UK)
2.0 lb
Munich – Light 10L (US)
0.5 lb
 Munich – Dark 20L (US)
0.5 lb
 Turbinado

I’ve started drifting towards using Pilsner malt as a base for IPAs because I feel it gives the malt a little more character; it adds a cracker character that I think compliments the type of IPA I like without outshining the hops. I prefer it to 2-row, because – honestly – 2-row is bland. Maris Otter is my favorite malt, and I have it included here to compliment Pilsner’s cracker with a bit of MO’s biscuit. The Munich Malts add a little bit of color and sweetness again without being too powerful in their own right, and the Turbinado is meant to give the IPA a dry finish.

The Mash

I mashed these grains at 152*F for 60 minutes, with a little bit of up-and-down to the temperature due to the windy conditions. Over the course of the 60 minutes the mash probably rested anywhere in the range of 148*F to 154*F. I added 3g of Calcium Chloride to the mash water before stirring in the grains. The CaCl is intended to lower the mash pH, but the reason I’m adding it is because it was recommended to me by Russ Heissner of Barrel House Z, after he sampled my amber ale. Knowing the water profile for the area (I live just south of Boston, and most of Massachusetts derives its water from the Quabbin Reservoir, which is noted for high quality, soft water), he recommended dosing with CaCl in the mash and in the boil. His recommendation was 150ppm or roughly 1.5g; this became closer to 2g because I don’t have a very accurate scale and somehow became 3g because I’m still an amateur and don’t often take good notes.

The vorlaufed and pulled just shy of 5 gallons on the first runnings (7.5 gallons mashed), and an additional 3 gallons from the second runnings (3.5+ gallons sparged) at a combined gravity of 1.050, which was right on target.

The Boil and the Hops

I reduced my usual boil time down to 60 minutes for this recipe, which was largely a function of me not wanting to wait the extra 30 minutes. I haven’t had many problems with off-flavors in my beer from the boil, so I decided to keep it short. Starting with just under 8 gallons of wort, I dropped in 1.5oz of Nugget for first wort hopping. Now first wort hopping might just be a total waste of time, but it’s a lot easier for me to drop the first hop charge right in there and if there’s any actual benefits from it, great. If not, *shrug*. I prefer Nugget as a bittering hop for two reasons, 1. I’ve experienced – and heard from others – it as imparting a smooth, even bitterness and 2. I bought a pound of Nugget, because it was on sale.

Chinook and Centennial. 15 min and 0 min additions.

Chinook and Centennial. 15 min and 0 min additions. (Empty space was where the Nugget was)

Because it was quite windy, the boil didn’t start until about 216*F. Here at sea level, it’s supposed to start at 212*F, so when it finally kicked off it was raging. After more finagling with the propane (and a lot of cursing), I got a nice rolling boil going and proceeded to walk the dog. When we got home, the wort was at 214*F but with no noticeable boiling. So I spent the last 30 or so minutes trying to keep it from going dead or boiling over. Despite the wind-shield on my burner, the strong gusts yesterday really fucked with my system. I curse you, Zephyr, to the very depths of Hades!

At 15 minutes remaining, I added 1.5oz of Chinook, 1.5oz of Centennial and the half-pound of Turbinado, along with my wort chiller. In news that will surprise no one, I forgot to add my whirlfloc tablet. The forgotten whirlfloc tablets keep me up at night. At flameout (0 minutes remaining), I added an additional ounce each of Chinook and Centennial after killing the flame, and began recirculating my wort. I placed the flameout hops in the center of my immersion chiller so the recirculated wort would run right through them.

A couple of spare notes on my process. First, I’m a skimmer.

Skimmin' like a villain.

Skimmin’ like a villain.

I try to skim the hot break protein off the top of my wort as it reaches a boil. My reasoning is simple: less hot break in the wort means less hot break in the fermenter.

Secondly, I use tea and spice infusion balls to hold my hops additions. Usually they work great, but for some reason either the heat or the boil or a combination of the two absolutely dissolved the Nugget hops. My other additions were fine, expanding and staying inside their metal prisons, but the Nugget, man…

Where'd you go?

Where’d you go?

IMG_1055

IMG_1069

After allowing the flameout hops to steep for 15 minutes – a relatively arbitrary time limit – I kicked on the immersion chiller, brought the temperature down to 59*F (!) and transferred it to a bucket, where I’d pitch my yeast.

Yeast and Fermentation

WLP075 aka Hansen Ale Blend

WLP075 aka Hansen Ale Blend

The yeast strain I used for this brew is White Labs’ WLP075 Hansen Ale Blend. This is one of their “Yeast Vault” strains that apparently has only been used in-house.

This is a blend of many IPA strain favorites. If you’re tired of only using WLP001, this strain is for you. It has the attenuation of WLP090 and the character of WLP007…
In the Tasting Room, the strain produced dry attenuation, was hop-forward, with minor ester production, and was a great flocculator, according to White Labs Brewer Joe Kurowski.

After checking the notes White Labs provided from their tasting room, I assumed an attenuation of around 78% and asked them to provide a good fermentation temperature for the strain. They suggested 65*F – 71*F. I started my chamber at 65*F and allowed to rise towards 68*F-69*F which is where I plan to let it sit for about 5-7 days before finishing out around 71*F.

I made a starter for this strain and then stepped it up so I could harvest out some additional yeast for my next brew. I may retry IPA #1 with this yeast strain to see how it comes out.

Wrapping Up

I concluded my brew day by force-carbonating IPA #1 and celebrating with Castle Island’s Keeper IPA. As of last night there was some noticeable activity from the fermentation chamber, before I bumped the temp up 2-3 degrees. I expect IPA #2 to have a much more West Coast flavor than #1, as I try to figure out my “perfect” IPA.

I know this was a (much) longer than usual post, and I’d love to here from you all if this is the kind of content you’d be more interested in going forward, as I’m trying to dial in my blog as much as my beer.

Cheers!

Peak Brew Season

ce9b2b09-1ec0-4e13-a49e-0aaa9f5cb987

Spring has sprung, and Prince is dead. The two aren’t related at all, and only one has anything to do with homebrewing but I’m a whore for web traffic.

I managed to squeeze in another brew day this past weekend, and after a few consecutive successful brews I was due for a number of screw ups. I brewed a new IPA recipes, Eighty-Sixed (recipe below and here) and managed to knock out the diptube while stirring my wort. Instead of emptying the keggle and trying to re-attach it, I went with the “fuck it” approach, realizing I’d lose some volume. Not a huge deal… until screw up numero B.

I use these spice infuser balls to keep my hop crud from clogging up my equipment or getting too much trub in my fermenter, and being this is an IPA I put a lot of balls (hehe) into this beer. Unfortunately, two of the balls popped open so that may have also contributed to my lackluster pull from this batch… only about 4 gallons.

So we’ll see how this IPA turns out. As you can see in the recipe below, this IPA contains oats and not a particularly flocculent yeast so I expect it to be cloudy; so I’m not too worried about the extra trub/hop crud in the keggle and fermenter. As we speak it is fermenting away in one of the fermentation freezers in my basement.

Also fermenting/conditioning are the rebrew of Uncommon Wrath which received 2 oz of Cascade dry hops a couple days ago. Wrath will be kegged tomorrow and bottled for competition on Sunday (and turned in for competition on Monday!). In addition to Wrath, the second 5 gallons of Carcosa are conditioning on chocolate, vanilla, and bourbon and have been for a couple months now and I’ll probably allow it to stay that way through the rest of the Spring and Summer (unless, of course, the first 5 gallons get kicked and I’m hankering for some stoutly goodness). The first 5 gallons conditioned for only about a month, so it’ll be interesting to see what the longer conditioning period will do for the stout’s flavor.

And lastly, my homebrew club – you know, the Mash Holes – brewed a barleywine to put into one of our club barrels. I brewed my 5 gallons worth of that barleywine the same weekend as Wrath, and that is still fermenting in advance of it going into the barrel next weekend (or the weekend after. I forget. I’m a bad VP).

Looking forward, I’m getting a special yeast from White Labs – Hansen Ale Blend – which I tend to build up and start harvesting and using for IPAs across the Spring and Summer. With any luck (and if it’s any good), I’ll using it for my hoppy beers for a while. The description is below:

This is a blend of many IPA strain favorites. If you’re tired of only using WLP001, this strain is for you. It has the attenuation of WLP090 and the character of WLP007.

Used in the White Labs Tasting Room. Visit here – http://tastingroom.yeastman.com – and search under the appropriate “strain #” for more details.

In the Tasting Room, the strain produced dry attenuation, was hop-forward, with minor ester production, and was a great flocculator, according to White Labs Brewer Joe Kurowski.

Phew! Lots of doings here at Anti-Hero Brewing. Until next time!

 

Eighty-Sixed

Stats

 OG: 1.073
FG: 1.021
IBU: 86
SRM: 5
ABV:6.8%

Batch & Boil

  • Batch Size: 6.0 gal
  • Boil Time: 90 min

Fermentables

Amount Fermentable Maltster Use PPG Color
7.5 lb

Pilsner (DE)

Any Mash 38 1 °L
7.5 lb

Golden Promise (UK)

Any Mash 37 3 °L
1.25 lb

Flaked Oats

Any Boil 33 2 °L
0.75 lb

Turbinado

Any Boil 44 10 °L
0.63 lb

Carapils (Dextrine Malt) (US)

Any Boil 33 1 °L

Hops

Amount Hop Time Use Form AA
1.25 oz Nugget (US) 60 min Boil Pellet 14.3%
1.0 oz Chinook (US) 30 min Boil Pellet 12.0%
1.1 oz Centennial (US) 15 min Boil Pellet 10.5%
2.0 oz Citra (US) 0 min Boil Pellet 13.7%
3.0 oz Citra (US) 4 days Dry Hop Pellet 13.7%

Yeasts

Name Lab/Product Attenuation
London Ale Yeast White Labs WLP013 71.0%

Extras

Amount Name Time Use
1.5 g Calcium Chloride 90.0 min Boil
1.5 g Calcium Chloride 1.0 hr Mash

Another Hustle, New England IPAs, and Lots of Events

I last posted about The Hustler, my attempt at a New England-style IPA. What is a “New England-style IPA?” Depends on who you talk to, and what year you’re having that discussion. In 2013, Harpoon tried to rebrand their flagship IPA as a “New England IPA.” Unfortunately for Harpoon, the Craft Beer Boom launched several new breweries in New England and a new-ish twist on the classic India Pale Ale emerged. Harpoon’s (excellent) malt-forward IPA, however, doesn’t fall in line with these new brews.

The NE IPA has no official definition, but since we’re on my blog, you’re getting my definition. The NE IPA trend probably started with The Alchemist’s Heady Topper, a phenomenal IPA from Vermont that sacrifices clarity for a fuller body, massive tropical fruit aroma, and strong but pleasant bitterness. Heady sets the bar for this style, but there are plenty of competitors that have emerged in the past few years:

  • New England Brewing Co’s Ghandi Bot (which is being renamed) is almost as sought-after and has similar descriptors to Heady.
  • Out in Western Massachusett’s, Tree House has released several NE IPAs: Julius, Green, and Sap. All amazing.
  • In Boston, Trillium has been releasing small batch IPAs that fall into this category, and their Fort Point Pale Ale is certainly a close cousin to the style.
  • Lawson’s Finest Liquids in Vermont has long had its Double Sunshine and recently released its Sip of Sunshine.
  • And then, of course, there’s Hill Farmstead.

When I brew The Hustler, here’s the characteristics I’m shooting for:

  • Appearance: hazy, near opaque, with a bright orange color and fluffy white head
  • Aroma: BIG hop aroma, specifically pine, peaches, apricot, tropical fruit, and floral notes
  • Mouthfeel: smoother and fuller than your average IPA with a dry-ish finish
  • Flavor: lots of hop character, smooth bitterness, lots of fruit notes with none of the medicinal sweetness that comes with a lot of DIPAs (or older IPAs).

The first go-around with The Hustler was a success, but could’ve gone with some minor improvements. The appearance was spot-on, and the aroma was great but could’ve been a little more potent. The mouthfeel was exactly what I was looking for in this style, but the flavor could’ve used a bit more bitterness. The solution: MOAR HOPS. I’ve brewed a few times with the Conan yeast strain used in Heady Topper, and I’ve found that this yeast strain tends mute the hop character that comes through in the beer. It throws its own wonderful esters and provides that great rounded mouthfeel, so I opted for it again this past Monday when rebrewing this beer. I increased my hop additions across the board, so we’ll see how that all turns out.

One minor issue with Monday’s brew: I forgot the Turbinado sugar. My plan is to boil, cool, and add the sugar tomorrow during active fermentation which will hopefully help dry out the finish of the beer a bit.

Beer Events

This Friday (the day before my birthday!) is Mama Said Hop You Out at a liquor store, not too far from my home. I’ve been to this event the past few years, and it’s a great chance to get some Hill Farmstead, Tree House, and other hard-to-find IPAs for only $30. This event is put on by Gordon’s Fine Wines in Waltham, MA. They do a few events like this each year, including a sour beer event and a dark beer event. The attendance on these events is usually less than 100 people and the beers are all – generally – amazing. These are some of my favorite events due to the intent nature, cheap price, and great finds. I realize I’m blowing up my spot by posting about these events, but if you’re in MA you should try to get to one.

September 10-12 is another of my favorite annual events: The New England Homebrewer’s Jamboree. My club, the Metro South Homebrew League (aka MASH HOLES), went to our first “Jambo” last year. It was an absolute blast. One of our guys took home the prize for best amber beer (the categories are broken down to light, amber, and dark). We’re hoping to not only snag a few more awards this year, but hopefully place in the People Choice Award for best club. We only brought about 10 people last year, and this year it looks like our group will double in size. It’s going to be a shitshow, and I couldn’t be more excited.

Last but not least: I’m going to the Great American Beer Festival this year! GABF is THE beer event, and I am pumped to have a chance to attend. I’ll be going to the American Homebrewer’s Association (AHA) session on Saturday with my younger brother, who happens to live in Boulder and will be putting me up for the week. The winners for each category are announced before the AHA Session, so we’ll have a brief period of time to create a plan of attack. Not to mention a week in Denver/Boulder. September is going to be an awesome month.

Final Notes

Holy shit, my hops are blowing up this year.

hops

This photo is about a month-and-a-half old, so they’ve actually gone a little more crazy since these were taken. Not sure how much Willamette I’m going to get out of this year’s harvest, but I’m excited to use them in some of my darker beers (Willamette is my go-to hop for stouts and porters). This will be my first year of actually harvesting and using these hops. I had a decent amount last year, but I decided the amount wasn’t forth the effort to dry and use them. Excited to see how these turn out.

Pumpkin beers are coming! I’m a huge fan of pumpkin beers, and have developed two pumpkin-based homebrew recipes. They are two of my better recipes and I intend on brewing both the Symphony of Decay and Pumpkin Pie Porter this year, as well as a third pumpkin recipe. The third will probably be a pumpkin saison (tentatively titled: Saisonal Creep).

I’m a Hustler, Baby… (new IPA on the way)

As we speak – well as I type and you read – I have somewhere between 4 and 5 gallons of a new IPA recipe dry-hopping in my basement. This new IPA – The Hustler – uses only two hop varieties (Chinook and Centennial) and features the (in)famous Conan yeast strain that is used in Heady Topper

I’ve talked about it before, but the IPAs I’ve brewed have been – for the most part – a huge disappointment for me. Maybe it’s because there are so many excellent commercial examples that even a “good” homebrew seems lackluster, maybe it’s just lack of practice, or lack of experience with different hop varieties. I don’t know. I do still love IPAs despite their ubiquity (and slipping quality), and I’d really love to craft one of my own that I can enjoy.

That’s all to say I have high hopes for this beer. It should be ready to keg by Thursday and ready to drink by Sunday.